View source for 3com port mirror/3com 2924 sfp

{{DISPLAYTITLE:3COM 2924 SFP port mirroring setting}}

3COM 2924 SFP port mirroring setting

= Defining Port Mirroring =
To enable port mirroring:
1. Click Monitoring > Port Mirroring > Setup. The Port Mirroring Setup
The Port Mirroring Setup Page contains the following fields:
* Select Port Type — Defines the port that will be the monitor port(destination port) and the port that will be mirrored(source port). The possible values are:
  * Monitor — Defines the port as the monitor port, the destination port.
  * Mirror — Defines the port as the mirrored port to be monitored and indicates the traffic direction to be monitored. If selected, the possible values are:
    * Mirror In — Enables port mirroring on the port RX.
    * Mirror Out — Enables port mirroring on the port TX.
  * Select port — Selects the port for mirroring or monitoring. A port unavailable for mirroring is colored grey.
  * Summary — Displays the current monitor and mirror ports. The fields displayed are:
    * Monitor — Displays the monitor port.
    * Mirror In — Displays ports that are monitored on the RX.
    * Mirror Out — Displays ports that are monitored on the TX.

2 Select a port type.
3 If the Mirrored port type is selected, select Mirror In and/or Mirror Out.
4 Select the ports to be monitored.
5 Click Apply. Port mirroring is enabled, and the device is updated.