Revision as of 16:24, 2 July 2014

3COM 2924 SFP port mirroring setting

Defining Port Mirroring

To enable port mirroring: 1. Click Monitoring > Port Mirroring > Setup. The Port Mirroring Setup The Port Mirroring Setup Page contains the following fields:

• Select Port Type — Defines the port that will be the monitor port(destination port) and the port that will be mirrored(source port). The possible values are:

 * Monitor — Defines the port as the monitor port, the destination port.
 * Mirror — Defines the port as the mirrored port to be monitored and indicates the traffic direction to be monitored. If selected, the possible values are:
   * Mirror In — Enables port mirroring on the port RX.
   * Mirror Out — Enables port mirroring on the port TX.
 * Select port — Selects the port for mirroring or monitoring. A port unavailable for mirroring is colored grey.
 * Summary — Displays the current monitor and mirror ports. The fields displayed are:
   * Monitor — Displays the monitor port.
   * Mirror In — Displays ports that are monitored on the RX.
   * Mirror Out — Displays ports that are monitored on the TX.

2 Select a port type. 3 If the Mirrored port type is selected, select Mirror In and/or Mirror Out. 4 Select the ports to be monitored. 5 Click Apply. Port mirroring is enabled, and the device is updated.