3com port mirror/3com 2924 sfp

From WFilter Documents and Tutorials
(Difference between revisions)
Jump to: navigation, search
(Created page with "{{DISPLAYTITLE:3COM 2924 SFP port mirroring setting}} 3COM 2924 SFP port mirroring setting = Defining Port Mirroring = To enable port mirroring: 1. Click Monitoring > Port M...")
 
 
(6 intermediate revisions by one user not shown)
Line 4: Line 4:
  
 
= Defining Port Mirroring =
 
= Defining Port Mirroring =
−
To enable port mirroring:
+
To enable port mirroring:<BR>
−
1. Click Monitoring > Port Mirroring > Setup. The Port Mirroring Setup
+
# Click Monitoring > Port Mirroring > Setup.<BR>
−
The Port Mirroring Setup Page contains the following fields:
+
## The Port Mirroring Setup Page opens:<BR>[[image:3com_2924_sfp_port_mirror.jpg]]<br>
−
* Select Port Type — Defines the port that will be the monitor port(destination port) and the port that will be mirrored(source port). The possible values are:
+
## The Port Mirroring Setup Page contains the following fields:<BR>
−
  * Monitor — Defines the port as the monitor port, the destination port.
+
##* Select Port Type — Defines the port that will be the monitor port(destination port) and the port that will be mirrored(source port). The possible values are:<BR>
−
  * Mirror — Defines the port as the mirrored port to be monitored and indicates the traffic direction to be monitored. If selected, the possible values are:
+
##** Monitor — Defines the port as the monitor port, the destination port.<BR>
−
    * Mirror In — Enables port mirroring on the port RX.
+
##** Mirror — Defines the port as the mirrored port to be monitored and indicates the traffic direction to be monitored. If selected, the possible values are:<BR>
−
    * Mirror Out — Enables port mirroring on the port TX.
+
##*** Mirror In — Enables port mirroring on the port RX.<BR>
−
  * Select port — Selects the port for mirroring or monitoring. A port unavailable for mirroring is colored grey.
+
##*** Mirror Out — Enables port mirroring on the port TX.<BR>
−
  * Summary — Displays the current monitor and mirror ports. The fields displayed are:
+
##* Select port — Selects the port for mirroring or monitoring. A port unavailable for mirroring is colored grey.<BR>
−
    * Monitor — Displays the monitor port.
+
##* Summary — Displays the current monitor and mirror ports. The fields displayed are:<BR>
−
    * Mirror In — Displays ports that are monitored on the RX.
+
##** Monitor — Displays the monitor port.<BR>
−
    * Mirror Out — Displays ports that are monitored on the TX.
+
##** Mirror In — Displays ports that are monitored on the RX.<BR>
 +
##** Mirror Out — Displays ports that are monitored on the TX.<BR>
 +
# Steps to setup port mirroring for WFilter.<BR>
 +
## Select "Monitor" port type, check the port connected to WFilter computer and click "Apply".
 +
## Select "Mirror" port type, choose both "Mirror In" and "Mirror Out", check the port connected to the up-layer device and click "Apply".
 +
## Done, now WFilter shall be able to monitor other devices.
  
−
2 Select a port type.
+
[[Category:Deployment]]
−
3 If the Mirrored port type is selected, select Mirror In and/or Mirror Out.
+
[[Category:3COM]]
−
4 Select the ports to be monitored.
+
−
5 Click Apply. Port mirroring is enabled, and the device is updated.
+

Latest revision as of 16:49, 16 March 2016


3COM 2924 SFP port mirroring setting

[edit] Defining Port Mirroring

To enable port mirroring:

  1. Click Monitoring > Port Mirroring > Setup.
    1. The Port Mirroring Setup Page opens:
      3com 2924 sfp port mirror.jpg
    2. The Port Mirroring Setup Page contains the following fields:
      • Select Port Type — Defines the port that will be the monitor port(destination port) and the port that will be mirrored(source port). The possible values are:
        • Monitor — Defines the port as the monitor port, the destination port.
        • Mirror — Defines the port as the mirrored port to be monitored and indicates the traffic direction to be monitored. If selected, the possible values are:
          • Mirror In — Enables port mirroring on the port RX.
          • Mirror Out — Enables port mirroring on the port TX.
      • Select port — Selects the port for mirroring or monitoring. A port unavailable for mirroring is colored grey.
      • Summary — Displays the current monitor and mirror ports. The fields displayed are:
        • Monitor — Displays the monitor port.
        • Mirror In — Displays ports that are monitored on the RX.
        • Mirror Out — Displays ports that are monitored on the TX.
  2. Steps to setup port mirroring for WFilter.
    1. Select "Monitor" port type, check the port connected to WFilter computer and click "Apply".
    2. Select "Mirror" port type, choose both "Mirror In" and "Mirror Out", check the port connected to the up-layer device and click "Apply".
    3. Done, now WFilter shall be able to monitor other devices.
Retrieved from "http://wiki.wfiltericf.com/index.php?title=3com_port_mirror/3com_2924_sfp&oldid=446"
Personal tools
Namespaces

Variants
Actions
Navigation
Tools