Huawei port mirror/huawei quidway S5012p
From WFilter Documents and Tutorials
(Difference between revisions)
(Created page with "{{DISPLAYTITLE:Huawei Quidway S5012P port mirroring setting}} Huawei Quidway S5012P port mirroring setting == Defining Port Mirroring == <p>Please follow below steps to conf...") |
|||
| (One intermediate revision by one user not shown) | |||
| Line 9: | Line 9: | ||
Set port 2 as the source mirrored port: | Set port 2 as the source mirrored port: | ||
[Quidway]mirroring-port GigabitEthernet 0/2 | [Quidway]mirroring-port GigabitEthernet 0/2 | ||
| − | The WFilter computer shall be connnected to "port 5", and the firewall is connected to "port 2". | + | The WFilter computer shall be connnected to "port 5", and the firewall is connected to "port 2".<br> |
By now, you can monitor all clients internet activity in local network. | By now, you can monitor all clients internet activity in local network. | ||
| + | |||
| + | [[Category:Deployment]] | ||
| + | [[Category:huawei]] | ||
Latest revision as of 10:46, 30 July 2014
Huawei Quidway S5012P port mirroring setting
[edit] Defining Port Mirroring
Please follow below steps to configure port mirroring on quidway S5012p switch:
Set port 5 as the destination port:
[Quidway]monitor-port GigabitEthernet 0/5
Set port 2 as the source mirrored port:
[Quidway]mirroring-port GigabitEthernet 0/2
The WFilter computer shall be connnected to "port 5", and the firewall is connected to "port 2".
By now, you can monitor all clients internet activity in local network.
