3COM 2924 SFP port mirroring setting
From WFilter Documents and Tutorials
Table Of Contents
3COM 2924 SFP port mirroring setting
Defining Port Mirroring
To enable port mirroring:
- Click Monitoring > Port Mirroring > Setup.
- The Port Mirroring Setup Page opens:
- The Port Mirroring Setup Page contains the following fields:
- Select Port Type — Defines the port that will be the monitor port(destination port) and the port that will be mirrored(source port). The possible values are:
- Monitor — Defines the port as the monitor port, the destination port.
- Mirror — Defines the port as the mirrored port to be monitored and indicates the traffic direction to be monitored. If selected, the possible values are:
- Mirror In — Enables port mirroring on the port RX.
- Mirror Out — Enables port mirroring on the port TX.
- Mirror In — Enables port mirroring on the port RX.
- Monitor — Defines the port as the monitor port, the destination port.
- Select port — Selects the port for mirroring or monitoring. A port unavailable for mirroring is colored grey.
- Summary — Displays the current monitor and mirror ports. The fields displayed are:
- Monitor — Displays the monitor port.
- Mirror In — Displays ports that are monitored on the RX.
- Mirror Out — Displays ports that are monitored on the TX.
- Monitor — Displays the monitor port.
- Select Port Type — Defines the port that will be the monitor port(destination port) and the port that will be mirrored(source port). The possible values are:
- The Port Mirroring Setup Page opens:
- Select a port type.
- If the Mirrored port type is selected, select Mirror In and/or Mirror Out.
- Select the ports to be monitored.
- Click Apply. Port mirroring is enabled, and the device is updated.