3COM 2924 SFP port mirroring setting

<<TableOfContents>>

3COM 2924 SFP port mirroring setting

Defining Port Mirroring

To enable port mirroring:

1. Click Monitoring > Port Mirroring > Setup.
   

The Port Mirroring Setup Page opens:
The Port Mirroring Setup Page contains the following fields:

• Select Port Type — Defines the port that will be the monitor port(destination port) and the port that will be mirrored(source port). The possible values are:
  

* Monitor — Defines the port as the monitor port, the destination port.

* Mirror — Defines the port as the mirrored port to be monitored and indicates the traffic direction to be monitored. If selected, the possible values are:

 * Mirror In — Enables port mirroring on the port RX.

 * Mirror Out — Enables port mirroring on the port TX.

* Select port — Selects the port for mirroring or monitoring. A port unavailable for mirroring is colored grey.

* Summary — Displays the current monitor and mirror ports. The fields displayed are:

 * Monitor — Displays the monitor port.

 * Mirror In — Displays ports that are monitored on the RX.

 * Mirror Out — Displays ports that are monitored on the TX.

1. Select a port type.
   
2. If the Mirrored port type is selected, select Mirror In and/or Mirror Out.
   
3. Select the ports to be monitored.
   
4. Click Apply. Port mirroring is enabled, and the device is updated.