3COM 2924 SFP port mirroring setting

From WFilter Documents and Tutorials
Revision as of 10:21, 30 July 2014 by WFilter (Talk | contribs)

Jump to: navigation, search


3COM 2924 SFP port mirroring setting

Defining Port Mirroring

To enable port mirroring:

  1. Click Monitoring > Port Mirroring > Setup.
    1. The Port Mirroring Setup Page opens:
      3com 2924 sfp port mirror.jpg
    2. The Port Mirroring Setup Page contains the following fields:
      • Select Port Type — Defines the port that will be the monitor port(destination port) and the port that will be mirrored(source port). The possible values are:
        • Monitor — Defines the port as the monitor port, the destination port.
        • Mirror — Defines the port as the mirrored port to be monitored and indicates the traffic direction to be monitored. If selected, the possible values are:
          • Mirror In — Enables port mirroring on the port RX.
          • Mirror Out — Enables port mirroring on the port TX.
      • Select port — Selects the port for mirroring or monitoring. A port unavailable for mirroring is colored grey.
      • Summary — Displays the current monitor and mirror ports. The fields displayed are:
        • Monitor — Displays the monitor port.
        • Mirror In — Displays ports that are monitored on the RX.
        • Mirror Out — Displays ports that are monitored on the TX.
  2. Select a port type.
  3. If the Mirrored port type is selected, select Mirror In and/or Mirror Out.
  4. Select the ports to be monitored.
  5. Click Apply. Port mirroring is enabled, and the device is updated.
Personal tools
Namespaces

Variants
Actions
Navigation
Tools