Deployment2

From WFilter Documents and Tutorials
(Difference between revisions)
Jump to: navigation, search
(Block UDP)
Line 34: Line 34:
  
 
[[Block_udp|How to block UDP traffic?]]
 
[[Block_udp|How to block UDP traffic?]]
 +
 +
= External Links =
 +
* [http://blog.wfilterros.com/?p=338 WFilter Pass-by deployment for multiple VLANs network.]
 +
* [http://blog.wfilterros.com/?p=168 WFilter deployment with gargoyle router.]
 +
* [http://blog.wfilterros.com/?p=170 WFilter deployment with a network tap.]
 +
* [http://blog.wfilterros.com/?p=171 WFilter deployment with openwrt router.]
 +
* [http://blog.wfilterros.com/?p=190 WFilter deployment with RouterOS’s port streaming feature.]
  
 
[[Category:Deployment]]
 
[[Category:Deployment]]
 
[[Category:Solutions]]
 
[[Category:Solutions]]

Revision as of 11:01, 21 February 2017

Contents

1 Pros and Cons

Pass-by deployment has the minimal influence to your current network. Advantages:

  • Integrated with your current hardware, network topology can remain unchanged.
  • No influence to your network performance. In pass-by mode, WFilter analyse copies of network packets and does not delay the original packets. So your internet speed will not be affected.
  • Internet access is still available even if the WFilter computer crash or power off.

Disadvantages:

  • Requires "port mirroring" feature of your switch or router.
  • In pass-by mode, WFilter sends RST packets to terminate tcp connections. But it can not block udp traffic, so you also need to block certain udp ports in your router or firewall. Please check: How to block certain UDP ports in router/firewall?


Below is a list of "port mirroring" settings for WFilter to work.

2 Port Mirroring Setting Examples

3 Block UDP

How to block UDP traffic?

4 External Links

Personal tools
Namespaces

Variants
Actions
Navigation
Tools