Brocade switch port mirroring setting

From WFilter Documents and Tutorials
Jump to: navigation, search


Local Port Mirroring Commands in Brocade switch

The following example configures the switch to mirror all packets from port 6 to 5:

Console(config)#interface ethernet 1/5
Console(config-if)#port monitor ethernet 1/6 both
Console(config-if)#

Check mirroring status:

Console#show port mirror
Port Mirroring
---------------------------------------------
  Destionation Port (listen port): Eth1/5
  Source Port (monitored port)   : Eth1/6
  Mode                           : Rx/Tx

Console#

In this example, the WFilter pc shall be connected to port Eth1/5, while port Eth1/6 is connected to the gateway. So WFilter can monitor all internet traffic.

Personal tools
Namespaces

Variants
Actions
Navigation
Tools