View source for Brocade port mirror/Brocade Switch

= Local Port Mirroring Commands in Brocade switch =

The following example configures the switch to mirror all packets from port 6 to 5:
<pre>
Console(config)#interface ethernet 1/5
Console(config-if)#port monitor ethernet 1/6 both
Console(config-if)#
</pre>
Check mirroring status:
<pre>
Console#show port mirror
Port Mirroring
---------------------------------------------
  Destionation Port (listen port): Eth1/5
  Source Port (monitored port)   : Eth1/6
  Mode                           : Rx/Tx

Console#
</pre>

In this example, the WFilter pc shall be connected to port Eth1/5, while port Eth1/6 is connected to the gateway. So WFilter can monitor all internet traffic.

[[Category:Deployment]]
[[Category:Brocade]]